SuperTurf-XP Pro…
General
This specification covers the proper installation of a new SuperTurf XP Pro synthetic turf. Turf shall be a Thiolon Polyethylene slit film fiber.
The turf system shall consist of an artificial grass like surface pile which shall be tufted into multiple layers of woven and non woven polypropylene. The backing of the turf shall then be coated with liquid polyurethane.
The entire system shall be resistant to weather, insects, rot, mildew, and fungus growth, and will be non-allergic and non-toxic.
The turf, infill and sub base system (separately and or combined) shall be capable of draining a minimum of 4” of water per hour.
The pile surface shall provide excellent traction in all types of weather with the use of conventional athletic shoes typically used at natural grass athletic sports fields. See warranty for types of shoes allowed
Quality Assurance
Turf Manufacturer / Designer: ATG Sports Industries, Inc.
Turf Product: SuperTurf XP Pro
Tufting Facility: Must be located in the United States and an official licensee of ATG Sports turf products.
Certifications: Contractor must be a current member of Sports Builder Association.
Turf General Contractor: Must be 100% US ownership with its main office in the United States. Regional offices must be within 100 miles of the project site. Turf contractor must have had the same ownership for not less than 10 years with no previous bankruptcies or operations of same or similar nature under a different name.
Installer: Must be an ATG Sports certified installer.
Materials: All supplied and installed materials and products will meet or exceed the minimum specifications designated in this section.
Inspection: Inspect all items prior to installation for quality standards set forth in these specifications
Verify Dimensions: Re-check field size and marking measurements and dimensions to verify conformity to specifications and standards.
Submittals: Prior to installation, Submit complete and detailed Drawings including layout of all component parts and materials installed under this section. Drawings shall show proposed locations of seams, lines, logos, numbers, hash marks and lettering specified.
Experience: Only companies with proven experience in all types of athletic surfacing installations and construction. A 5% bid preference will be given for each item met by bidders.
1. Total years in athletic surfacing business.
2. Companies under the same name and that have not changed names or ownership in 15 years or more.
3. Companies with 100% U.S. ownership.
4. Regional offices located within 100 miles of the project.
Samples: Supply artificial turf samples of the proposed product for evaluation 10 days prior to the bid date.
Maintenance and Operations Data: Contractor shall submit all warranty and maintenance information prior to acceptance of the bid.
Warranty: Eight years, see warranty & maintenance instruction under separate cover.
Performance
ASTM D 1577 Denier
8000
ASTM D 418 Pile Weight Minimum
45 ounces
ASTM F 1015 Abrasive Index
14-18
ASTM F 1015 G-max
Less than 120
ASTM F 1015 G-max/Lifespan
Less than 160
Primary Backing
3-layer woven and non-woven
Secondary Backing
20 ounce polyurethane minimum
Pile Height
2.1 inches to 2.25 inches
Tuft Bind
9-18 pounds/foot
Gauge
3/8” to ½”
ASTM D 2859 Flammability
Pass
Permeability
12-20 inches per hour
UNI EN ISO 2062 Elongation
Max 150 percent
Warranty - As Specified
8 year
Stitch rate minimum
Based on Gauge
Rubber infill
.5 to 1.5
Total proprietary infill
3.0 to 3.3 lbs/f2
All lines shall be permanently tufted into the field.
The fabric surface will be installed in 15-foot widths.
The SuperTurf system can be sewn or glued as specified by the Owner/Architect. Both systems shall meet or exceed the warranty period.
The dynamic cushioning of the turf shall not exceed an average maximum value of 120g’s at 70 degrees upon installation and 160g’s over the lifetime.
All seaming materials shall be resistant to moisture, bacterial and fungus attacks.